www.cenafittings.us http://www.cenafittings.us Sun, 20 May 2012 11:37:30 GMT http://www.cenafittings.us/blog-en/WPL6-steel-for-use-in-pressure-at-low-temperatures-27.html VIRGILIO CENA & FIGLI S.p.a. manufactures WPL6 steel connections. This material is intended mainly for the use at low temperatures with high pressure.The chemical composition of WPL6 carbon steel makes it ideal for use in environments with extreme working temperatures which easily reach several tens of degrees below "0": standard ASTM A420, used for this type of steel, provides for the resilience test at -50°C. ... Mon, 14 May 2012 05:00:00 GMT http://www.cenafittings.us/blog-en/WPL6-steel-for-use-in-pressure-at-low-temperatures-27.html http://www.cenafittings.us/blog-en/VIRGILIO-CENA-&-FIGLI-S.p.a.:-connection-production-according-to-standard-EN-10253-2-26.html The standard EN10253-2 defines the technical characteristics, general conditions and acceptance levels for the supply of weld-on connections in alloy and carbon steel, designed in compliance with the Pressure equipment directive PED and suitable to withstand a clearly defined internal pressure. ... Mon, 07 May 2012 05:00:00 GMT http://www.cenafittings.us/blog-en/VIRGILIO-CENA-&-FIGLI-S.p.a.:-connection-production-according-to-standard-EN-10253-2-26.html http://www.cenafittings.us/blog-en/VIRGILIO-CENA-S.p.a.-manufactures-steel-elbows-and-connections-25.html VIRGILIO CENA & FIGLI S.p.a. is a company specialised in the production of elbows and concentric reducers since 1957. CENA complements its range with the commercialisation of rounded bottoms, tees (with equal or reduced joints) and eccentric reducers. Our company products are used in many different sectors, from Oil & Gas to the hydro-chemical sector, in the production of boilers and heat exchangers and in industrial installations. ... Mon, 30 Apr 2012 05:00:00 GMT http://www.cenafittings.us/blog-en/VIRGILIO-CENA-S.p.a.-manufactures-steel-elbows-and-connections-25.html http://www.cenafittings.us/blog-en/Steel-elbows-manufactured-by-VIRGILIO-CENA-S.p.a.-for-TUBE-2012-24.html VIRGILIO CENA & FIGLI S.p.a will take part at the biennial fair TUBE 2012 (International trade fair for plants and technologies for tube processing) which will be held in Düsseldorf  (Germany) from 26th March 2012 to 30th March 2012.The event will be an excellent opportunity to present our products, including steel elbows, concentric and eccentric reducers, reduced or equal tee joints and rounded bottoms, manufactured according to the standards ASME B 16:9 and EN 10253-2. ... Mon, 23 Apr 2012 05:00:00 GMT http://www.cenafittings.us/blog-en/Steel-elbows-manufactured-by-VIRGILIO-CENA-S.p.a.-for-TUBE-2012-24.html http://www.cenafittings.us/blog-en/Production-of-draw-elbows-23.html VIRGILIO CENA & FIGLI S.p.a. can count on its technological resources and proven experience in the sector, as well as its constant collaboration with suppliers, to provide draw elbows of the highest quality. The draw elbows made by our company possess an intrinsec product quality which can only be achieved by thermo controlled hot-drawing. The forming process for drawing involves forcing a piece of pipe against a mandrel whose outer edge has an increasing bending radius and diameter. ... Mon, 16 Apr 2012 05:00:00 GMT http://www.cenafittings.us/blog-en/Production-of-draw-elbows-23.html http://www.cenafittings.us/blog-en/EU-directive-for-manufacturers-of-fittings-22.html The EU directive for manufacturers of fittings is Directive 97/23/CE for pressure equipment (PED) (where the CE mark refers to the directives issued by the EEC after its transformation into the European Union.) According to the European Directive, which came into force on 29 May 2002, fittings ordered with a specific request to conform to PED must meet the following requirements: a) The equipment designer must define the necessary values and certification criteria. ... Mon, 09 Apr 2012 05:00:00 GMT http://www.cenafittings.us/blog-en/EU-directive-for-manufacturers-of-fittings-22.html http://www.cenafittings.us/blog-en/Use-of-P265-GH-steel-for-the-production-of-Butt-weld-fittings-21.html P265GH is a European steel used for manufacturing high pressure boilers andpipelines to be installed in conditions with elevated heat loads, industrial plants and heat exchangers. In terms of use, chemical composition and mechanical properties, P265GH steel can be considered the superior version of P235GH steel. VIRGILIO CENA & FIGLI S.p.a. ... Mon, 02 Apr 2012 05:00:00 GMT http://www.cenafittings.us/blog-en/Use-of-P265-GH-steel-for-the-production-of-Butt-weld-fittings-21.html http://www.cenafittings.us/blog-en/P235GH:-High-thermo-mechanical-resistance-steels-20.html P235GH is a European steel used for the manufacturing of pipes subjected to high pressures and to high heat loads. The steel is used especially for fittings used in boilers and heat exchangers manufacturing. ... Mon, 26 Mar 2012 05:00:00 GMT http://www.cenafittings.us/blog-en/P235GH:-High-thermo-mechanical-resistance-steels-20.html http://www.cenafittings.us/blog-en/Stainless-steel-fittings-19.html Stainless steels, also known as chromium steels, are iron/carbon alloys which combine the typical mechanical properties of carbon steels with corrosion-resistant properties. The corrosion-resistant properties of stainless steel fittings are due to the presence of elements such as chromium in the alloy. ... Mon, 19 Mar 2012 06:00:00 GMT http://www.cenafittings.us/blog-en/Stainless-steel-fittings-19.html http://www.cenafittings.us/blog-en/Seamless-concentric-reducers-18.html In the sector of fluid transportation through forced pipelines, extreme care must be taken in the use of concentric reducers. They represent the critical points of the installation and it is essential that these elements are realised with the highest attention possible. VIRGILIO CENA & FIGLI S.p.a. produces seamless concentric reducers in accordance with main ASME B16.9 and EN 10253-2 manufacturing standards which ensure high quality standards. ... Mon, 12 Mar 2012 06:00:00 GMT http://www.cenafittings.us/blog-en/Seamless-concentric-reducers-18.html http://www.cenafittings.us/blog-en/Steel-fittings-15.html There are different applications in the Oil & Gas sector which require metallic and non-metallic fittings. The fundamental norms which regulate the production of but weld steel fittings on a worldwide level are the ASME (American Society of Mechanical Engineers – www.asme.org) norms. VIRGILIO CENA & FIGLI S.p.a. produces its own fittings according to the ASME B16. ... Mon, 21 Feb 2011 06:48:00 GMT http://www.cenafittings.us/blog-en/Steel-fittings-15.html http://www.cenafittings.us/blog-en/Production-of-fittings-14.html The fittings used in the Oil & Gas sector, where the transportation of the petrol and gas is done on land and under water using pipelines, there are environments with high severity indexes. For this reason, the production of fittings is subject to an attentive analysis not only on behalf of the pipeline builders but also on behalf of the engineering companies, the end users and the multinational companies involved in the project. ... Mon, 14 Feb 2011 08:45:00 GMT http://www.cenafittings.us/blog-en/Production-of-fittings-14.html http://www.cenafittings.us/blog-en/Oil-and-gas:Trade-Show-Calendar-for-Oil-and-Gas-13.html In 2011, there are many trade shows for the Oil & Gas sector on a global level which can be of interest for those in the butt weld fittings sector. In February, there is the NOG 2011 trade show (Nigeria Oil & Gas) in Abuja, Nigeria from the 21st to the 24th and in Australia, in Perth from February 23 to 25, there is the AOG 2011 (The AustralAsian Oil & Gas Exhibition & Conference). Tel:030-398561 Mail:info@cenafittings. ... Fri, 21 Jan 2011 08:39:00 GMT http://www.cenafittings.us/blog-en/Oil-and-gas:Trade-Show-Calendar-for-Oil-and-Gas-13.html